specification control drawing thermofit devices raychem corporation 300 constitution drive menlo park, ca 94025 usa title: soldersleeve* shield terminator unless otherwise specified dime nsions are in millimeters. inches dimensions are in between brackets. document no.: d-142-6x tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron raychem reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d981311 replaces: d961394 drawn by: r. mapalo date: 07/14/98 rev.: see table doc issue: 2 scale: none size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check for the latest revision product revisions product dime nsions cable dimensions part name a min b min l max d max e min j 1.3 (.05) d-142-65 f 10.80 (.425) 11.65 (.460) 29.75 11.4 (.450) 5.7 (.225) 9.4 d-142-66 d 13.35 (.525) 13.84 (.545) (1.170) 13.6 (.535) 8.9 (.350) (.370) material 1. insulation sleeve: heat-shrinkable, radiation cro ss-linked modified polyvinylidene fluoride. natural. 2. solder preform with flux: solder: type cd18 per ansi j-std-006. flux: type rol1 per ansi j-std-004. 3. meltable sealing ring: thermally st abilized thermoplastic. color: blue. 4. meltable sealing ring: thermally stab ilized thermoplastic. color: natural. application 1. these parts are designed to provide an environmen t protected shield termination on cables, rated for 105 c minimum, meeting the dimensional criteria listed and having tin or silver plated shields. 2. temperature range: -55 c to +125 c. 3. install using raychem-approved convec tion or infrared tools in accordance with raychem assembly procedure rcps-100-70. 4. assemblies will meet requirements of raychem speci fication rt-1404 and national aerospace standard nas-1747. for best results, prepare the cable as shown: *a trademark of raychem corporation.
|